How long does an epoxy garage floor last?
A professionally installed floor on a ground slab lasts many years. A peeling floor almost always comes down to prep, not age.
What wears a floor out.
Poor bond
The number one cause of failure. Acid-etched or unground concrete lets salt brine creep under the coating, and it lifts in sheets. We diamond-grind every slab.
Hot tires
Hot tires on a thin coating can pull it up. A thicker build and a polyaspartic top coat stand up to it.
Sunlight
Many epoxies yellow by the door where sun hits them. A UV-stable polyaspartic top coat doesn’t.
Grit and traffic
Sand ground in under tires slowly dulls the top coat. Sweeping and squeegeeing out slush keeps the finish glossy.
Moisture from below
Damp slabs can push a coating off. That’s why we moisture-test and use a tolerant primer where needed.
Making it last.
Most of it is done on install day. The rest takes a few minutes a month.
Squeegee salty slush out every week or two in winter. Hose it out and mop with a pH-neutral cleaner in spring. Put a pad under kickstands and jack stands. Skip vinegar, citrus and harsh solvents.
When the top coat eventually dulls, it doesn’t need a full redo: it can be scuffed and recoated, which costs a fraction of a new floor.
See your floor done right.
Free on-site measure and a written price. No pressure.